Talking about a wood industry or any industry that deals explicitly in cutting, molding, and such procedures, an arm saw is a must-have equipment.
Arm saw suitable for circulating and cutting the crosscut ( wood cutting ), but it is also ideal for molding the wood, cutting grain ( rip ), and curving the edges.
It is the primary tool nowadays for cutting small or long pieces of wood stocks. It has an apparent and sleek genesis used for slicing the details of an object.
One needs to be more competent in handling and operating the work rather than putting all the effort into it. Such devices as arm saws are very portable, consume much less volume, and don't need any significant knowledge or science to cope with.
Overview of Arm Saw
While it is mainly used as a crosscut saw, this tool can vastly and quickly be used in cutting bevels or miters, used in a rip, and used in dadoes or rabbets. It has a unique characteristic, which is also primarily used for moldings, in similar cases, operated in a guide for a router.
The operator or a worker needs to push the object ( wood as supposed) to a fence and from there pulls the saw upfront to proceed into the cutting phase. In the modern era, many factories and workers still pick up this tool and prefer to get the task done. It is much more versatile than any traditional table saw. It is accurate, easy to use, precise in cutting, and can easily cut through long and thick wood and other materials.
Functions of Arm Saw
Some of the most valuable and essential functions of an Arm Saw in an industry are explained below:
Bevels and Miters
Arm saw can easily cut slopes that are up to 90 degrees and for miters that are either left or right of 60 degrees. Arm saw can cut these both but in only one constant direction. After all, this will also let the arm saw use more cutting complex angles even more.
Crosscutting
It is the primary objective of the arm saw, the crosscutting. It has blades upfront, which rotates for the wood stock. The pressure, accuracy, and level can be manually programmed by maintaining the control area. The efficiency rate is significantly higher if the worker does this procedure by hand.
Dadoes and Rabbets
When making tenons for different furniture shelves, crosscutting the rabbets or dadoes can be much easier using the arm saw. When the blade rotation is started, the direction is achieved in the cutting phase. The final form of this material will be so precise and accurate that you will not need to have a second go on them.
Rip cuts
Ripping is not ideally clean or neat when using an arm saw, but it gets the job done in much less time. The only limitation in ripping cuts while using this tool is the width of the material.
Workflow of arm saw
The working mechanism of the arm saw is very much the same as the radial arm saw or table saw because it has all the beneficiary components and parts installed, which are essential in this line of work.
The blades and saw on this tool are the main crafts that do 90% of the work. The quality and the finishing touch after the object is thoroughly gone through from the arm saw is satisfying and premium to touch.
It is easier to install, consumes less space, and is so easy to navigate and operate.
Classifications of arm saw
1. Table saw
The table saw and this arm saw has everything in common. But the main difference between them and why this table saw falls in the classification of it is that table saw is ideal for cutting the stock of wood length-wise along with some grains on it.
2. Miter saw
Miter saw is much handy while cutting in-depth, capacity of cutting, safety, and versatility. Miter can quickly go through a big-width pile of woods, grains, and wide angled objects.
Benefits of using the arm saw.
Some of the essential advantages of using the arm saw are discussed below:
Simple design to cope with workers.
Easy navigation to let workers operate with it.
Precise in cutting and final results.
Flexible in nature.
Portable, can carry anywhere with ease.
Quick in cutting woods.
Great efficiency.
Take less time when processing.
Much higher versatility.
It packs power.
Types of wood that arm saw can process
After discussing many things on this tool, we know the basics and heated stuff about it. The material and wood can this tooling process are mentioned below:
Tempered wood.
High-grade steel.
Hardwood.
Softwood.
Plastic.
Ceramic.
Nonferrous metals.
Drywall.
Timbers.
Thick joists.
Finished wood effect of arm saw.
After the whole cutting procedure and molding of woods and metals are done, workers do not need to go for the second round to be more precise and accurate in the cutting. The final results from the arm saw are very satisfactory and well finished.
It is one of the best tools that workers can operate with. With the characteristics of many similar big machines, it can quickly increase the production rate and have premium finishing touches.
Conclusion
An ideal arm saw is very easy to install and start the task; that is why there are still many big factories that are vouching for this tool. Many even prefer to use this more than anything else.
It can be easily found in old workshops, large factories, and a place where a couple of projects are happening simultaneously. This has always been a worthy investment for higher, premium-quality finished goods.
Talking about its versatility, any organization can buy and place it for use. Whereas a miter saw and table saw are for a long run and can consume much space, an arm saw is ideal for everyone.
It would help if you went for it instead of buying a heavy and oversized piece of machinery.